Marimaca Copper (TSX: MARI) has drilled 102 metres grading 1.00% copper at its Pampa Medina deposit. That result is the longest intercept in a new set of results that the company says confirm the continuity of the deposit’s high grade mantos as central-zone drilling nears completion.
That interval came from hole SPRD-21, starting 706 metres downhole and carrying 5.1 g/t silver. SPRD-18, drilled 150 metres to the north, returned 68 metres of 1.13% copper.
Both holes sit in the central zone of a 3 kilometre by 1.5 kilometre area of interest, now drilled on 150 metre centres. Marimaca says this work will support a maiden resource estimate.
Highlights from the results include:
- SPRD-21: 1.00% copper and 5.1 g/t silver over 102 metres from a depth of 706 metres
- Including 1.24% copper and 6.8 g/t silver over 72 metres
- SPRD-18: 1.13% copper and 8.7 g/t silver over 68 metres from a depth of 634 metres
- Including 2.07% copper and 10.0 g/t silver over 22 metres
- SPRD-19: 1.36% copper and 6.6 g/t silver over 34 metres from a depth of 832 metres
- Including 2.63% copper and 17.8 g/t silver over 8 metres
- SPRD-24: 1.69% copper and 13.3 g/t silver over 18 metres from a depth of 448 metres
- Including 3.21% copper and 27.5 g/t silver over 8 metres
- SPRD-25: 1.12% copper and 9.9 g/t silver over 54 metres from a depth of 320 metres
- Including 1.93% copper and 16.5 g/t silver over 8 metres
The holes cut several stacked mantos within the target sedimentary horizons, and SPRD-21 tracked mineralization into the basement units. Drilling also widened the near surface oxide footprint. SPRD-26 hit 84 metres of 0.62% copper roughly 300 metres west of the historical oxide limit, but late dykes cut it and two other holes short at depth.

True widths are estimated at about 80% of the reported intervals.
“These results continue to build our confidence in the quality and continuity of the Pampa Medina system,” said Sergio Rivera, vice president of exploration. He added that the next phase will test whether the system continues north and west, where geophysical work has identified targets.
The rigs are now moving to the Pampa Norte and Sierra Norte targets.
Pampa Medina lies about 28 kilometres east of the Marimaca Oxide Deposit, the company’s flagship, which is advancing toward construction. In October, Marimaca won approval to connect that project to the 110kV El Lince line. It also agreed terms for a renewable power supply at a cost close to the US$93/MWh assumed in its definitive feasibility study, and early site works are scheduled to begin in the fourth quarter.
Marimaca Copper last traded at $5.74 on the TSX.